Heads


Head Set #1
African American
Set of Nine Heads
Cast in Pewter

For Use with 25-30mm "Heroic Scale" miniatures

Sculpted By
Tom Meier
CONV-001
9 for $9.00

Figure Conversion Parts


Renegade Backpacks
For Use with 25-30mm "Heroic Scale" miniatures
Set of 6

Set One
CONV-INF-001
6 FOR $6.00
 

Renegade Backpacks Bulk Set
For Use with 25-30mm "Heroic Scale" miniatures
Set of 30 Back Packs

Set One
CONV-INF-001
30 FOR $25.00

Weapons
Weapons Base One
The top of the smaller circle
is 20mm diameter.
Width of legs 60mm from one side to the other.
CONV-WEAPON-001
1 for $4.00
Weapons Base two
The smaller hole is 1/2"
The large hole is 1"
Width of legs 18 cm from
one side to the other.
CONV-WEAPON-002
1 for $20.00


Ammo Feed Belts
Cast in Pewter

 

Ammo Feed Belt License for Sculpting Reproduction

Purchase if you wish to use The Dragon Forge Design
Ammo feed Belts for sculpting figures for reproduction.

If you are a sculptor or miniature company wanting to use my Ammo Feed Belts on figure sculpts for reproduction, you must purchase a license for use.

One Time License Fee is $5.00
Ammo Feed License
Ammo Feed Belts
Size 2

Cast in Pewter
Width 2 mm
Length 40 mm
5 Belts
CONV-AFB-002
1 for $3.00
Ammo Feed Belts
Size 3

Cast in Pewter
Width 3 mm
Length 40 mm
4 Belts
CONV-AFB-003
1 for $3.00
Ammo Feed Belts
Size 4

Cast in Pewter
Width 4.5 mm
Length 40 mm
3 Belts
CONV-AFB-004
1 for $3.50


Don't Forget Your Power Cables

Vehicle Accessories
Jerry Can
Set of 1
For use with 28-30mm figures and vehicles

Sculpted by Ben Rodman
Cast in Pewter
V-CONV-001
1 for $1.00
Jerry Cans
Set of 10 Jerry Cans
For use with 28-30mm figures and vehicles

Sculpted by Jeff Rodman
Cast in Pewter
V-CONV-002
10 for $7.50
Pick and Shovel Set
Set of 2 tools
For use with 28-30mm figures and vehicles

Sculpted by Jeff Rodman
Cast in Pewter
V-CONV-003
1 for $1.50
Potr Caps
2 Sizees
Small 8mm Diameter
Large 12mm Diameter
12 Caps

For use with 28-30mm figures and vehicles
V-CONV-004
12 for $4.00
Cable Bundles
Set of Six Different Cables
Average length 90mm
Set One

For use with 28-30mm figures and vehicles
V-CONV-005
6 for $8.00

 

Cargo Boxes
Set Of Six Small Cargo Boxes
Width - 20mm
Six different size boxes per set

For use with 28-30mm figures and vehicles
CONV-CBS-001
6 for $5.00
Set Of Six Medium Cargo Boxes
Width - 25mm
Six different size boxes per set

For use with 28-30mm figures and vehicles
CONV-CBM-001
6 for $6.00
Set Of Six Large Cargo Boxes
Width - 30mm
Six different size boxes per set

For use with 28-30mm figures and vehicles
CONV-CBL-001
6 for $7.00

Gears
Gears Set One
Five sizes
20mm,15mm, 10mm, 8mm, 5mm Diameter
"Rivet Strip Spru"
CONV-GEAR-001
5 for $7.50
Gears Set Two
Two sizes
20mm,15mm, Diameter
"Rivet Strip Spru"
CONV-GEAR-002
2 for $4.00

Vents

Vent Set One
21 Different Sized Vents

Cast in Urethane Resin
Cast in a sheet, Cut apart to use
CONV-VENT-001
1 Set for $7.50

Vent Set Two
21 Different Sized Vents With Rivet's

Cast in Urethane Resin
Cast in a sheet, Cut apart to use
CONV-VENT-002
1 Set for $7.50

Round Vent Set One
2 Of Each Size Vent
4 Different Sized Vents
Cast in Urethane Resin

Cast in a sheet, Cut apart to use
CONV-VENT-003
1 Set for $7.50


Tools

Jack Hammer

For use with 28-30mm figures and vehicles

One Piece
CONV-TOOLS-001
1 for $2.00

All Product is sold Unpainted
Some Modeling Skill Required
Contains small parts.
Not for Children under 3 years of age.